How to Winterize Your Cottage Water Filter System Midland, Ontario

How to Winterize Your Cottage Water Filter System Midland, Ontario

How to winterize your cottage water treatment system? Get a FREE REPORT on the 10 Biggest Mistakes made when purchasing water treatment equipment and how you can avoid them. or

Share this video

For more great information about water treatment, subscribe!

This video by Gary the Water Guy explains How to winterize your cottage water treatment system.

If you are planning on shutting off the heat in your cottage over the winter months you will need to protect your water treatment equipment from damage. The following steps must be taken to ensure your water treatment equipment does not freeze.
Water Softeners, Iron/Sulphur Filters, Tannin Filters or any other type of Backwashable Filter. See my blog post called “How to Winterize a Water Softener”. The procedure is the same, as you are basically draining and removing the tank(s) and storing them in a warm location until spring. Just make sure that if you have a FOC or FOB filters that you relieve the air pressure inside before disconnecting from your plumbing.
Ultra Violet Disinfection Systems need to have the bulb and quartz sleeve removed and all the water drained from the unit ideally by blowing it out with a compressor.
Cannister Type Filter Cartridges either as part of an Ultra Violet Disinfection System or on their own need to have the filters removed and all of the water dumped out and water lines blown out.
Reverse Osmosis Drinking Water Systems should be completely removed, including the storage tank, and stored in a warm location over the winter. All filters and the membrane should be removed and ideally discarded and replaced in the spring, or at the very least the filters and membrane should be removed and stored in fresh reverse osmosis water in a container in the fridge over the winter. If the storage water goes murky, replace the water with fresh reverse osmosis water during storage
The rest of the cottage, including the hot water heater and pressure tank also needs to be drained (make sure to shut off the hot water heater before draining).

For more great information about water treatment, subscribe! or

Follow me

Please comment or ask questions below.…

How To Install & Maintain The Sgreen Water Filter for Screen Printing

How To Install & Maintain The Sgreen Water Filter for Screen Printing

Check out the Sgreen wash out booth water filteration system here:

Hey screen printers it’s Ryan here in the Ryonet Darkroom, in this video we are going to show
you how to setup and maintain Ryonet’s Sgreen Filter.

The Sgreen Water Filtration system uses a 6 stages of filters to clean the solids and ink residue out of your water and filter out particulate all the way down to 20 microns.

We’ve made the Sgreen Filter very easy to install. Once you unpack it the filter comes pretty much ready to go.

Simply install the casters and then make sure the screens are set into the correct spots from largest mesh on top to smallest mesh on bottom and place the filter matte inside the top screen.

Roll it under your washout sink, we’ve made this so it can fit into as small as a 30” wide by 24” deep washout sink.

You will want to put a down spout coming out of your washout sink and an angle on that spout so it feeds directly into the center of the filter mat.

Then attach the hoses to the outside filters and ensure they are secure and tight.

The hose leaving the second unit can be directed down the drain, since your sump pump will be pushing this you can elevate this hose if needed or extend it to another area of your building.

Next you want to plug in your sump and run some water into the system to ensure the pump is working properly. The pump will automatically kick on when the water trigger is activated. Ensure water is flowing throughout the filter without any leaks or clogs. Once confirmed, your filter is now set up and you can start cleaning screens.

Next let’s talk about maintaining your Sgreen Filter.

Every few days you will want to shake out your filter matte, the more you do this the longer it will last. Eventually it will become too clogged and dirty. We have included one extra in your kit and you can order replacement packs from after that.

The filter matte is the most replaceable item in the system. When cleaning the filter mat ensure the screens below are also clean,
when they start to clog up you can first shake them out and …

Reverse osmosis water purification scam: Hidden camera investigation (CBC Marketplace)

Reverse osmosis water purification scam: Hidden camera investigation (CBC Marketplace)

Clean Water, Dirty Tricks: Marketplace goes undercover to expose the techniques used in door-to-door sales of water purification systems — devices that can cost thousands of dollars, but which most people simply may not need.
To read more:

»»» Subscribe to CBC News to watch more videos:

Connect with CBC News Online:

For breaking news, video, audio and in-depth coverage:
Find CBC News on Facebook:
Follow CBC News on Twitter:
For breaking news on Twitter:
Follow CBC News on Instagram:

Download the CBC News app for iOS:
Download the CBC News app for Android:

For more than 75 years, CBC News has been the source Canadians turn to, to keep them informed about their communities, their country and their world. Through regional and national programming on multiple platforms, including CBC Television, CBC News Network, CBC Radio,, mobile and on-demand, CBC News and its internationally recognized team of award-winning journalists deliver the breaking stories, the issues, the analyses and the personalities that matter to Canadians.…

HATCHING CUDDLEFISH, SEAMOTH ZAPPER, and WATER FILTER!! – Subnautica Gameplay Playthrough – Ep. 27

HATCHING CUDDLEFISH, SEAMOTH ZAPPER, and WATER FILTER!! – Subnautica Gameplay Playthrough – Ep. 27

Let’s play Subnautica! In this episode, we build an alien containment tank and hatch two cuddlefish eggs! We also upgrade the seamoth and build a water filtration system! ► Join me on Patreon!
► Leave a LIKE if you enjoy! It really helps!
► Subscribe for more!
► Subnautica playlist:
► Twitter:

Get Subnautica on Steam:


You have crash-landed on alien ocean world, and the only way to go is down. Subnautica’s oceans range from sun drenched shallow coral reefs to treacherous deep-sea trenches, lava fields, and bio-luminescent underwater rivers. Manage your oxygen supply as you explore kelp forests, plateaus, reefs, and winding cave systems. The water teems with life: Some of it helpful, much of it harmful.

After crash landing in your Life Pod, the clock is ticking to find water, food, and to develop the equipment you need to explore. Collect resources from the ocean around you. Craft knives, lights, diving gear, and personal water craft. Venture deeper and further form to find rarer resources, allowing you to craft more advanced items.

Build bases on the sea floor. Choose layouts and components, and manage hull-integrity as depth and pressure increase. Use your base to store resources, park vehicles, and replenish oxygen supplies as you explore the vast ocean.

What happened to this planet? Signs abound that something is not right. What caused you to crash? What is infecting the sea life? Who built the mysterious structures scattered around the ocean? Can you find a way to make it off the planet alive?
Disrupt the Food Chain

The ocean teems with life: Use the ecosystem to help you. Lure and distract a threatening creature with a fresh fish, or simply swim as fast as you can to avoid gnashing jaws of roaming predators.

Build a Pressure Re-Active Waterproof Nanosuit, or PRAWN Suit, and explore extreme depth and heat. Modify the suit with mining drills, torpedo launchers, propulsion cannons, grappling hooks and more.

As the sun goes down, the predators come out. The ocean is unforgiving of those caught unprepared in the darkness. Areas that are safe to explore during the day become treacherous at night, but also reveal a beauty that those who hide from the darkness will never see.

Cave systems wind below the sea bed, …

10 Best Water Filters 2017

10 Best Water Filters 2017


Please Note: Our choices for this wiki may have changed since we published this review video. Our most recent set of reviews in this category, including our selection for the year’s best water filter, is exclusively available on Ezvid Wiki.

Water filters included in this wiki include the waterchef c7000, home master artesian, brondell h2o+, ispring rcc7, apec top tier 5-stage, pur led 11 cup, filtrete high performance, watts premier uf-3, woder 10k-genii, and invigorated living awp-b35l.

Most Recent Picks:…